Hobart Commercial Range Repair in Midland, TX
Need Hobart commercial range repair in Midland, TX? We find the actual cause, explain it in plain terms, give you a price before we start and back the finished repair with a 90-day parts-and-labor warranty.
- Upfront quote before work
- 90-day parts & labor warranty
- Parts matched to your model
- Same-day service when available
Repairing Hobart Commercial Ranges
Hobart commercial ranges use model-specific control boards, sensors and wiring layouts, so we start by reading the model and serial number from the rating label. That tells the technician which parts fit and whether any service bulletins apply to your unit.
How we repair your Hobart Commercial Range
A commercial range is a heavy-duty gas or electric restaurant range with open burners or hot tops over a standard or convection oven, built for continuous use. Every commercial range depends on a heat source, gas burners with igniters or electric elements, a temperature sensor and a control that switches heat on and off to hold the set temperature. A technician confirms gas or power supply, tests igniters, elements and sensors, and checks door seals and calibration.
In a commercial kitchen a down range or oven slows every order, so commercial cooking equipment is scheduled as a priority visit.
Hobart Commercial Range repair at a glance
- Typical repair cost$180–$600
- Typical service life13–18 years
- Warranty on repairs90 days parts & labor
- QuoteUpfront, before work
- Same-day visitsWhen available
Common Hobart Commercial Range problems we fix
What usually causes each symptom, and what our technician checks to confirm it.
Open burner flame weak or uneven
- Likely causes
- Grease-clogged burner ports, a cracked burner, low gas pressure or a failing regulator.
- What our technician checks
- Burners are removed and inspected and manifold pressure is measured under load.
Safety valve shuts gas off during service
- Likely causes
- A failing thermocouple or safety valve, or a pilot that is being knocked out by grease or spills.
- What our technician checks
- Safety valve hold-in and thermocouple output are tested.
Gas valve knobs stiff or hard to turn
- Likely causes
- Grease buildup and wear inside burner valves that need lubrication or replacement.
- What our technician checks
- Valves are inspected, lubricated with approved grease or replaced and leak tested.
Oven will not hold temperature
- Likely causes
- A failed oven thermostat, a damaged capillary bulb, a worn door spring or a warped door that leaks heat.
- What our technician checks
- Oven temperature is measured over several cycles and the thermostat is calibrated or replaced.
Oven door will not close tight
- Likely causes
- Broken or stretched door springs, worn hinges or a bent door from impact.
- What our technician checks
- Springs, hinge pins and door alignment are inspected and adjusted.
Pilot will not stay lit
- Likely causes
- A weak or misaligned thermocouple, a dirty pilot orifice or drafts from a hood that is pulling too hard.
- What our technician checks
- Thermocouple millivolts and pilot flame size and position are checked.
Quick checks you can do safely
- Make sure the main gas valve and the quick-disconnect hose are fully engaged.
- Check that the restraint cable is attached so the range is in its correct position.
- Clean grease from burner ports and pilot areas at the end of the shift.
- Relight pilots following the instructions on the unit.
- Confirm the hood fan is running, since some systems interlock the gas supply.
Safety first: If you smell gas, shut off the main gas valve, clear the kitchen and call for service before relighting.
Still not working?
Call and describe what you see and hear, plus any error code. It helps the technician bring the right parts on the first visit.
(844) 442-1999Seeing a code? Try our error code lookup or troubleshooting wizard.
Our 5-step commercial range repair process
- Call or book onlineTell us the appliance, brand and what it is doing. We confirm a visit window that works for you.
- DiagnosisThe technician inspects and tests the commercial range to find the actual cause, not just the symptom.
- Upfront quoteYou get a clear price before any work starts. No surprise charges.
- RepairWe fix it with parts matched to your model, often on the same visit when the part is on the truck.
- Test and warrantyWe test the unit under normal operation, clean up and back the repair with a 90-day parts-and-labor warranty.
Hobart Commercial Range repair cost and lifespan
National ballpark estimates. Your exact price depends on the part and labor, and you get it upfront after diagnosis. On the fence? Try the repair vs replace calculator.
Parts we replace most often
- Thermocouple
- Pilot assembly
- Oven thermostat
- Safety valve
- Burner valve
- Door spring
- Gas regulator
We match every part to your model and serial number.
Keep your Hobart Commercial Range running longer
- Keep the quick-disconnect hose and restraint cable in good condition.
- Boil out or scrape the oven floor to prevent grease fires.
- Schedule periodic gas pressure and leak checks.
- Have the oven thermostat calibrated on a regular schedule.
- Clean burner grates, drip trays and ports daily.
Build a maintenance plan
Create a printable monthly, quarterly and yearly checklist for every appliance in your home.
Open the schedule generatorHobart Commercial Range repair in Midland, TX
Hot summers and sudden cold snaps in Texas put refrigerators, freezers and ice makers in Midland under heavy load.
We provide commercial range repair throughout Midland, including ZIP codes 79701, 79702, 79703, 79704, 79705 and 79706 and more, and in nearby Odessa, Stanton and Andrews.
Commercial Range brands we repair
Frequently Asked Questions
How much does Hobart commercial range repair cost in Midland, TX?
Most Hobart commercial range repairs fall roughly between $180 and $600, depending on the part and labor involved. That is a national ballpark estimate; you get an exact quote after diagnosis and before any work starts.
Can you repair my Hobart commercial range the same day?
Often, yes. Call (844) 442-1999 early in the day and we will try to schedule a same-day visit. Same-day service depends on technician availability and whether the part is in stock.
Is the repair guaranteed?
Yes. Completed repairs are covered by a 90-day parts-and-labor warranty. If the same problem comes back in that time, we come back and fix it.
Which brands do you service?
We work on all major brands, including Garland, Hobart, Middleby and Vulcan.
Should I repair or replace my Hobart commercial range?
A typical Hobart commercial range lasts about 13 to 18 years. If yours is well within that range and the repair costs less than half the price of a new one, repair is usually the better value. Our technician will tell you honestly if replacement makes more sense.
Other ranges, stoves and ovens repairs
- Pizza Oven Repair
- Electric Range Repair
- Double Oven Repair
- Countertop Convection Oven Repair
- Oven Repair
- Gas Range Repair
- Convection Oven Repair
- Single Wall Oven Repair
- Stove Repair
- Rotating/Rack Pizza Oven Repair
- Tandoor Oven Repair
- Dual-Fuel Range Repair
More repair services
- Refrigerator Repair
- Washing Machine Repair
- Dryer Repair
- Dishwasher Repair
- Range Repair
- Microwave Repair
- Ice Maker Repair
- Freezer Repair
- Samsung Cooktop Repair
- Electrolux Washing Machine Repair
- Selmi Chocolate Tempering Machine Repair
- Camp Chef Smoker Repair
- Nest Smoke Detector Repair
- Shark Robotic Vacuum Repair
Get your commercial range fixed in Midland
Upfront quote before work starts · Parts matched to your model · 90-day warranty